M/61000/M
Guiding and stopper cylinder (sliding bearing)
info@nortrade.ro | +40 31 425 17 06/07
info@nortrade.ro | +40 31 425 17 06/07
Slides and guided units are pneumatic cylinders with built-in guidance — the cylinder body and the linear-motion guidance are integrated in one unit. Eliminates the conventional approach of mounting a cylinder + separate linear-motion guide rail on a base plate (alignment problems, more parts, higher cost). Norgren's range covers two functional families: the M/61000 Guiding and Stopping Unit for precision side-load applications with ±0.02 mm guidance accuracy (ball bearing, instroke; plain-bearing variant ±0.06-0.11 mm — see datasheet); and the M/60100 Slide Unit (Ø 10-40 mm) with double piston rod for high bending and torsional rigidity in compact form.
Guiding and stopper cylinder (sliding bearing)
Guiding and stopper cylinder (linear ball bearing)
Slide unit, double acting (twin piston rod)
Plain bearing (M/61000/M, Ø 32-80 mm): higher side-load capacity, more tolerant of contamination, better for shock loads and dirty environments, lower cost. Linear ball bearing (M/61000/MR, Ø 32-100 mm): higher precision (±0.02-0.03 mm instroke; ±0.04-0.05 mm outstroke), higher speeds (less rolling friction), but more sensitive to dirt and shock. M/61000/W2R (Ø 32-100 mm) is ball bearing with special wipers — for contaminated environments where the ball bearing needs protection. Pick by environment + speed: dirty/heavy → plain, clean/fast → ball, dirty + fast → /W2R.
M/60100 is the compact double-rod approach — for small bore Ø 10-40 mm, where the load is light to moderate and the parallel-rod arrangement is enough (operating pressure 1-8 bar). M/61000 is the larger, more capable integrated guide: /M Ø 32-80 mm with plain bearing, /MR and /W2R Ø 32-100 mm with ball bearing, ±0.02 mm precision spec in the best case (operating pressure 1-10 bar). Use M/60100 when bore is small and rigidity is the goal; M/61000 when precision or higher force is the goal.
