info@nortrade.ro | +40 31 425 17 06/07
info@nortrade.ro | +40 31 425 17 06/07
IO-Link is revolutionising Industrial Automation by offering a standardised and seamless communication interface for all IO-Link devices, with simple installation and a complete range of diagnostics functionality.
Our NC series includes IO-Link Masters and I/O Modules (Hubs) that serve as the gateway to your system.
Our range of cables and connectors allow for simple and easy connecting of power and data communications to your IO-Link Masters and I/O Modules (Hubs).
For optimal results, use our accessories including blanking plugs and IO-Link software.
IO-Link (IEC 61131-9) is a point-to-point communication standard for intelligent connection of sensors and actuators, maintained by the IO-Link Consortium (io-link.com). It enables remote parameterization, diagnostics, and condition monitoring of devices. Benefits: standardized, manufacturer-independent, simple cabling (3 wires), and can be integrated into existing PLC systems via Profinet/EtherNet-IP gateways.
The IO-Link Master module connects IO-Link devices to the higher-level controller (PLC). The Master module connects to the PLC via Profinet, EtherNet/IP, or other industrial bus. IO-Link devices (sensors, valve islands) connect to the Master with simple, unshielded 3-wire cables. Configuration is done via software using IODD (IO Device Description) files.
NorTrade’s range includes IO-Link Master modules (4 and 8 port versions), IO-Link capable valve islands, pressure switches and flow sensors with IO-Link interface, as well as the necessary cables and connectors. Norgren IO-Link solutions are compatible with major PLC manufacturers’ systems (Siemens, Rockwell, Beckhoff). Request a quote for your system.
When designing and operating pneumatic systems in the EU, the following standards apply: ISO 4414 (general pneumatic safety requirements), EN ISO 13849 (safety controls within machines), and compliance with the 2006/42/EC Machinery Directive. Key principles: the system must always be depressurized before maintenance, maximum operating pressure is determined by the weakest component, and the pressure rating of pipes/hoses must be regularly inspected.
According to the lockout/tagout (LOTO) procedure: shut off the air supply at the main valve, then release residual pressure from the system through the exhaust valve. Verify with a pressure gauge that the pressure is truly zero, and only then perform any work. Never work on a pressurized system.
Send us the original part’s manufacturer code (part number) via the Get a Quote form or email to info@nortrade.hu. Our engineers will identify the product and provide the exact Norgren equivalent, price, and delivery time.
Norgren products are manufactured according to ISO and other international standards, so ISO-standard cylinders, fittings, and valves are physically compatible with same standard products from other manufacturers. NorTrade engineers help with cross-referencing — we provide exact cross-references and technical comparisons. Request a quote.
