info@nortrade.hu | +36 1 421 4032
info@nortrade.hu | +36 1 421 4032
Our comprehensive range of fittings, tubing, and accessories provides everything you need to complete your pneumatic systems. From composite and nickel plated brass fittings to high-quality tubing and essential accessories, we offer solutions for every application.
Composite, nickel plated brass, push in, compression, stainless steel, miniature fittings and more.
Nylon and polyurethane tubing, clips, cutters, and hoses – everything you need to get up and running.
Our accessory range includes ball valves, quick acting couplings, exhaust silencers, blow guns, and many other products.
Our range includes push-in quick fittings for the fastest installation, threaded fittings (G and R thread) for higher pressure applications, as well as swivel fittings and manifolds. Norgren Pneufit® push-in fittings are available in tube diameters from 4 mm to 16 mm and can be used up to 18 bar pressure.
G thread (ISO 228) is a British standard parallel thread, sealed with an O-ring on the face. NPT (National Pipe Taper) is an American tapered thread where the taper provides the seal (Teflon tape or thread sealant required). Important: G and NPT threads are not compatible with each other — mixing them leads to leakage. NorTrade products primarily use G thread fittings in accordance with the European standard.
Tubing selection factors: inner diameter (determines flow capacity), pressure rating, flexibility, temperature range, and chemical resistance. Polyurethane tubing for general-purpose applications, nylon for higher pressures, Teflon (PTFE) for food industry and chemical environments. NorTrade engineers help with selecting the right tubing type.
Yes, modern push-in fittings (like the Norgren Pneufit®) are fully designed for industrial use. They feature vibration-resistant locking, double sealing, and can withstand up to 10 million cycles. They seal immediately when pushed onto the tube, and release with the push of a button — significantly speeding up installation and maintenance.
When designing and operating pneumatic systems in the EU, the following standards apply: ISO 4414 (general pneumatic safety requirements), EN ISO 13849 (safety controls within machines), and compliance with the 2006/42/EC Machinery Directive. Key principles: the system must always be depressurized before maintenance, maximum operating pressure is determined by the weakest component, and the pressure rating of pipes/hoses must be regularly inspected.
According to the lockout/tagout (LOTO) procedure: shut off the air supply at the main valve, then release residual pressure from the system through the exhaust valve. Verify with a pressure gauge that the pressure is truly zero, and only then perform any work. Never work on a pressurized system.
Send us the original part’s manufacturer code (part number) via the Get a Quote form or email to info@nortrade.hu. Our engineers will identify the product and provide the exact Norgren equivalent, price, and delivery time.
Norgren products are manufactured according to ISO and other international standards, so ISO-standard cylinders, fittings, and valves are physically compatible with same standard products from other manufacturers. NorTrade engineers help with cross-referencing — we provide exact cross-references and technical comparisons. Request a quote.
